BeagleBoard-based Laptop: Difference between revisions
(Created page with 'This page has been created to share information on creating a laptop based on the BeagleBoard. ==The easy way== Just buy a Touch Book, and be done with it. But, that's n…') |
No edit summary |
||
| Line 11: | Line 11: | ||
*Powered USB hub |
*Powered USB hub |
||
*USB keyboard and pointing device |
*USB keyboard and pointing device |
||
* |
*Storage device of some kind (in this case, either an SD card or a USB mass storage device) |
||
*LCD that can be interfaced to DVI/HDMI or the BeagleBoard's built-in LCD controller |
*LCD that can be interfaced to DVI/HDMI or the BeagleBoard's built-in LCD controller |
||
*Some way of powering this LCD (if it can run off of +5 VDC, and its inverter can too, all the better) |
*Some way of powering this LCD (if it can run off of +5 VDC, and its inverter can too, all the better) |
||
| Line 18: | Line 18: | ||
Other things that you'll want: |
Other things that you'll want: |
||
*Speakers |
*Speakers |
||
*A DVI/HDMI splitter, if you're using a DVI/HDMI LCD |
*A DVI/HDMI splitter, if you're using a DVI/HDMI LCD (for multi-monitor support) |
||
*USB Wifi |
*USB Wifi |
||
*USB ethernet |
*USB ethernet |
||
*Battery and charging circuit |
|||
==Thoughts of how to do it== |
|||
Ideally, this would be done cheaply. Seeing as this is DIY, you can cheat. Find a cheap used LCD on eBay? Go for it. Got a dead ThinkPad lying around with a keyboard that would be perfect for this? Why not? |
|||
===Case=== |
|||
Wood. Ridiculously cheap, easy to work with, and decently strong. No, it's not pretty, and it could be lighter and thinner, but remember, cheap is the name of the game. Plastics and metals can be cheap... if you have ways to work with them. |
|||
===LCD=== |
|||
To get one decently small with reasonable resolution, there's only one option, really... find something out of a broken laptop. Of course, you'll need to hook it to either DVI or LVDS, have fun with that... |
|||
===Keyboard and pointing device=== |
|||
First things first, this is RISC OS, you need three buttons. ThinkPads are your best bet, as they've all (well, all the recent ones) got three-button TrackPoints, although you'll need to adapt the keyboard to dual PS/2, and then USB, somehow. |
|||
===Power=== |
|||
If you're doing this on the cheap, remember that charging LiIon is difficult, expensive, and/or dangerous, pick 2 of the 3. NiMH is probably the way to go. |
|||
{{stub}} |
{{stub}} |
||
Revision as of 04:56, 7 October 2009
This page has been created to share information on creating a laptop based on the BeagleBoard.
The easy way
Just buy a Touch Book, and be done with it. But, that's no fun, now, is it?
The hard way
So, you want to actually do this yourself.
Here's what you'll need, at bare minimum:
- BeagleBoard (revision C3 recommended)
- Powered USB hub
- USB keyboard and pointing device
- Storage device of some kind (in this case, either an SD card or a USB mass storage device)
- LCD that can be interfaced to DVI/HDMI or the BeagleBoard's built-in LCD controller
- Some way of powering this LCD (if it can run off of +5 VDC, and its inverter can too, all the better)
- Some form of case (hinges are important, too)
Other things that you'll want:
- Speakers
- A DVI/HDMI splitter, if you're using a DVI/HDMI LCD (for multi-monitor support)
- USB Wifi
- USB ethernet
- Battery and charging circuit
Thoughts of how to do it
Ideally, this would be done cheaply. Seeing as this is DIY, you can cheat. Find a cheap used LCD on eBay? Go for it. Got a dead ThinkPad lying around with a keyboard that would be perfect for this? Why not?
Case
Wood. Ridiculously cheap, easy to work with, and decently strong. No, it's not pretty, and it could be lighter and thinner, but remember, cheap is the name of the game. Plastics and metals can be cheap... if you have ways to work with them.
LCD
To get one decently small with reasonable resolution, there's only one option, really... find something out of a broken laptop. Of course, you'll need to hook it to either DVI or LVDS, have fun with that...
Keyboard and pointing device
First things first, this is RISC OS, you need three buttons. ThinkPads are your best bet, as they've all (well, all the recent ones) got three-button TrackPoints, although you'll need to adapt the keyboard to dual PS/2, and then USB, somehow.
Power
If you're doing this on the cheap, remember that charging LiIon is difficult, expensive, and/or dangerous, pick 2 of the 3. NiMH is probably the way to go.
