Hardware for RISC OS ports
From RISC OS
Jump to navigationJump to search
This page lists hardware that may be suitable for porting RISC OS to.
Do not list hardware that already has a port under way.
When listing hardware, please list the following:
- What the device is
- Basic specifications (what CPU and/or SoC it uses, memory, storage, display and/or display connections, networking, any other connections, and a price in both the country of origin and UK pounds)
- Pros - what this hardware would bring to RISC OS, relative to other hardware
- Cons - downsides to this particular hardware
- Link(s) for further info
Think about what the hardware really will bring to the platform, or whether it's suitable for the applications that RISC OS is used in. If it's not really suitable, please don't include it. Also, please check the talk page - hardware that has been deemed unsuitable may be moved there.
OpenPandora
Handheld gaming console/netbook-like device
Specifications
- Texas Instruments OMAP3530 @ 600+ MHz
- 256 MiB DDR333 SDRAM
- 512 MiB NAND Flash
- 800x480 4.3" resistive touchscreen, composite and S-Video display outputs
- 802.11b/g Wifi, Bluetooth 2.0
- USB 2.0 OTG and host, dual SDHC, stereo audio in/out
- US$330, approximately UK£207.16 exc. VAT
Pros
- Would provide mobile platform for RISC OS
- Can use existing work from BeagleBoard port
- Has built-in networking hardware
Cons
- May be too small form factor
- Storage could be an issue
More info
Genesi Efika MX Open Client
Freescale i.MX515-based nettop
Specifications
- Freescale i.MX515 @ 800 MHz
- 512 MiB RAM
- 4 GiB internal SSD
- HDMI and VGA display outputs
- 802.11b/g/n Wifi, Bluetooth
- 2x USB 2.0 host, SDHC, audio jacks
- US$249, approximately UK£156.31 exc. VAT
Pros
- Desktop machine, fastest Cortex-A8 available
- More on-board storage than other current solutions
- Has VGA port for driving older monitors
- Has built-in networking hardware
Cons
- Would require a new port, to the i.MX515
More info
eInfochips OpenRD-client
Small desktop machine called OpenRD-client
Specifications
- Marvell Kirkwood 88F6281 @ 1.2 GHz
- 512 MiB RAM DDR2-400
- 512 MiB Flash
- VGA display output upto 1280x1024@60 Hz
- 2x Gigabit Ethernet
- 7x USB 2.0 host
- SDHC, audio jacks, serial port
- eSATA and internal SATA
- 2x USB 2.0 host, SDHC
- US$249, approximately UK£156.31 or 173.76 € exc. VAT
Pros
- A9home-like, compact machine
- ARMv5 compatible, so existing IYONIX-compatible software runs unchanged
- built-in video, audio, networking, storage, USB
Cons
- Graphics chip (XGI Volari Z11) not very powerful
- No floating point unit
- Higher power consumption than Cortex-A8 solutions of the same performance or better
- Would require a new port
More info
- eInfochips product page
- GlobalScale to buy an OpenRD-client with enclosure
