OLE Client Specification

From RISC OS

(Difference between revisions)
Jump to: navigation, search
(Creating an OLE session: Many clarifications)
(Messages to be handled by the client: Many clarifications)
Line 239: Line 239:
==Messages to be handled by the client==
==Messages to be handled by the client==
-
 
-
Note EG: I am a bit hazy on the message protocol. In the list below some
 
-
entries for my ref (+8) and your ref (+12) may be given as zero, when they
 
-
in fact hold a sensible value
 
===OLECloseSession===
===OLECloseSession===
Line 248: Line 244:
  --------------------------------
  --------------------------------
       +0 = length of block
       +0 = length of block
-
       +4 = task handle of sender
+
       +4 = task handle of sender (a server or client)
       +8 = my ref
       +8 = my ref
     +12 = 0
     +12 = 0
Line 259: Line 255:
This message is sent by a server when it wants to close a session
This message is sent by a server when it wants to close a session
(probably because the user has finished editing the object) or when it is
(probably because the user has finished editing the object) or when it is
-
shutting down, in which case all its sessions should be closed.
+
shutting down, in which case all its sessions should be closed  
 +
(Session number = -1).
-
The client must check if it knows the task handle of the Server as
+
The client must check if it knows the task handle of the sender as
-
given in the message, and has open sessions associated with it. If not,
+
a server it has open sessions associated with.
-
it should ignore the message.
+
If not, it should ignore the message.
For the given session number the client should remove the file on disk
For the given session number the client should remove the file on disk
Line 274: Line 271:
  -------------------------------
  -------------------------------
       +0 = length of block
       +0 = length of block
-
       +4 = task handle of sender
+
       +4 = task handle of sender (the server)
       +8 = my ref
       +8 = my ref
     +12 = 0
     +12 = 0
-
     +16 = message number
+
     +16 = message number (&80E1E)
     +20 = format number
     +20 = format number
       format = 0 (saved to a different file) then
       format = 0 (saved to a different file) then
Line 289: Line 286:
This is what OLE is all about. The client is informed that the file has
This is what OLE is all about. The client is informed that the file has
-
been changed by the server. It should read the modified file (from the
+
been changed by the server.  
 +
 
 +
The client must check if it knows the task handle of the server as
 +
given in the message, and has a session with the given Session number
 +
open with it. If not, it should ignore the message.
 +
 
 +
If there is a session, it can read the modified file (from the
original path for format 1, the given path for format 0). The client
original path for format 1, the given path for format 0). The client
presumably may want to display the modified file in its own window.
presumably may want to display the modified file in its own window.
 +
 +
On the other hand, a client may choose to delay the update of its data
 +
until the session is closed.
Note that this message does not imply that the session is over. The
Note that this message does not imply that the session is over. The
Line 300: Line 306:
  ----------------------------------
  ----------------------------------
       +0 = length of block
       +0 = length of block
-
       +4 = task handle of the sender
+
       +4 = task handle of the sender (the server)
       +8 = my_ref
       +8 = my_ref
-
     +12 = your_ref
+
     +12 = your_ref (copy of my_ref from the OLEOpenSession sent by the client)
     +16 = message number (&80E22)
     +16 = message number (&80E22)
     +20 = 16 byte unique name padded with zeros
     +20 = 16 byte unique name padded with zeros
Line 322: Line 328:
It is a copy of the OLEOpenSession message the client sent to the
It is a copy of the OLEOpenSession message the client sent to the
server, with the your_ref field filled with the value of the my_ref of the
server, with the your_ref field filled with the value of the my_ref of the
-
client's original message.
+
client's original message, and the message code replaced with the
 +
code for OLEOpenSessionAck (&80E22).
-
The client should make a note of the task handle in combination with
+
The client should check the your_ref value to see if it matches the my_ref
-
the Session number. When the client at some point wishes to drop the
+
of an OLEOpenSession message it sent, and check the Session number. If
-
document that is being edited by the server, it can tell the server by
+
there is no match, the message should be ignored.
-
sending a OLECloseSession message directly to the server using the task
+
 
-
handle received in this message. Also, the server is identified by its
+
If the message is recognised the client should make a note of
-
task handle in all the messages that it sends to clients, such as
+
the task handle of the sender for this
-
Message_OLECloseSession.
+
Session number. It will need this task handle to recognise messages coming
 +
from this server and when sending a message to the server.
===OLEOpenSession===
===OLEOpenSession===
Line 336: Line 344:
  -------------------------------
  -------------------------------
       +0 = length of block
       +0 = length of block
-
       +4 = task handle of the sender
+
       +4 = task handle of the sender (a client)
       +8 = my_ref
       +8 = my_ref
     +12 = 0
     +12 = 0
Line 358: Line 366:
try to get the server to respond.
try to get the server to respond.
 +
The client should check the task handle of the sender to see if it
 +
is its own task handle. (The client's task handle can be found in
 +
the block pointed to by R1 after it sent the OLEOpenSession message
 +
with Wimp_SendMessage).
 +
 +
Note that this message may also arrive due to a broadcast by another
 +
client who is looking for a server. In that case the task handle of the
 +
sender will be different from the client's own task handle, and
 +
it will be a type 17
 +
(User_Message) or, more likely, type 18 (User_Message_Recorded) message.
 +
These should be ignored by the client.
 +
 +
====Format 0====
If a format 0 message comes back, this means the server is not running.
If a format 0 message comes back, this means the server is not running.
The client should try to start the server using the value in the -R field
The client should try to start the server using the value in the -R field
-
of the environment variable and broadcast a new OLEOpenSession message,
+
of the environment variable. If the Wimp_StartTask of the server failed
 +
(it returned a task handle of 0)
 +
the client should consider the attempt failed and display an appropriate
 +
message to the user, and clean up (remove the saved file, remove the session
 +
from its internal list, etc).
 +
 
 +
On succes, the client should send a new OLEOpenSession User_Message_Recorded (18)
 +
message directly
 +
to the server, using the task handle returned by Wimp_StartTask,
this time with format set to 1.
this time with format set to 1.
 +
====Format 1====
If a format 1 message comes back, this means that we tried to start the
If a format 1 message comes back, this means that we tried to start the
server but it either died or does not acknowledge the message (i.e. it
server but it either died or does not acknowledge the message (i.e. it
refuses to handle the file for some reason). The client should assume the
refuses to handle the file for some reason). The client should assume the
-
session failed and clean up (remove the saved file, remove the session
+
session failed, inform the user with a suitable message,
 +
and clean up (remove the saved file, remove the session
from its internal list, etc).
from its internal list, etc).
 +
====Format 2====
If a format 2 message comes back, the server apparently has died since
If a format 2 message comes back, the server apparently has died since
the last contact. The client should clean up the old session and start a
the last contact. The client should clean up the old session and start a
-
new OLE session from scratch, i.e. send an OLEOpenSession message with
+
new OLE session from scratch, i.e. read the environment variable,
 +
send an OLEOpenSession message with
format 0 and continue the same way as for the original session.
format 0 and continue the same way as for the original session.
-
 
-
Note that this message may also come by due to a broadcast by another
 
-
client who is looking for a server. In that case it will be a type 17
 
-
(User_Message) or, more likely, type 18 (User_Message_Recorded) message.
 
-
These should be ignored by the client.
 
-
 
==Actions a client should take==
==Actions a client should take==

Revision as of 18:14, 29 January 2009

This page is intended as a full description of the Computer Concepts OLE protocol as seen from the client side. A programmer writing an application should be able to find here all the information required to let the application work as an OLE client. To let the application work as an OLE server, see the OLE Server Specification.

Contents

The client

A client application (such as a desktop publishing program, or a mail handler) may wish to edit data it is capable of loading and rendering (such as drawfiles or plain text files). Such an application could provide facilities to edit these files itself, or use an already resident editor by sharing the file with it.

It seems sensible and easier to choose the second option, in which case the client needs to ask a 'compliant' server to engage in a two way data sharing session. It can find a server by looking for an environment variable set up by the server.

The server variable

Any application which provides its own file type and is capable of editing such files may set itself up to be an OLE server. To do so it needs to create a system variable, outlining the file type it can edit.

The syntax of this variable is as follows:

Variable name  = OLEServer$Type_XXX
Variable value = -N <UniqueName> -R <RunCommand>

X          = 0..9 | A..F
AlphaChar  = 0..9 | A..Z | a..z
UniqueName = [1..16]*<AlphaChar> (i.e. one to sixteen AlphaChars)
RunCommand = A * command string that will start the server

Spaces must be used as separators. The -N token should always be first and the -R token last. Both tokens must be present.

Typical examples are

  OLEServer$Type_AFF : -N OLESupport -R /Desktop_OLESupport
  OLEServer$Type_FFF : -N StrongED -R /ADFS::HardDisk4.$.Apps.!StrongED


Tokens

-N <UniqueName>
This token specifies a unique name to identify the server in an OpenSession message. This message is broadcast so it is up to the server who recognises the name to respond. This string can be up to 16 characters long. When passed in messages it should be specified as a 16 byte string with all unused bytes zeroed.
Note the server name should be modelled on the application name such as 'OLESupport' used by the support module or 'StrongED' as used by the StrongED text editor.
-R <RunCommand>
This token allows a potential client to run the server. It should provide a string which can be passed directly to Wimp_StartTask. This should start with a run command an be followed by the location of the server. This location could be an expanded pathname or more usually a system variable. Note that the RunCommand can contain spaces, and for convenience -R should be the last token in the variable. Examples:
run <Draw$Dir>
/<Draw$Dir>

Creating an OLE session

An OLE session should be initiated by a client application.

Checking the environment variable

The client should check to see if an OLEServer$Type_XXX variable exists for its file type. (If it cannot find such a variable, then the client may wish to use the OLESupport module which simulates the response of a client for particular file types. See OLESuppDoc for information on how to use this module task).

Start the session

Having found a server variable, the client should save its data to disc and send an OpenSession message with format 0 as a broadcast, using the unique name specified in the variable. If the server is already running it will respond with an acknowledge.

If there is no acknowledgement, the client will get it's message back as a User_Message_Acknowledge (19) message. It should then try to start the server using the -R token and again broadcast the OpenSession message, this time with format 1. If again the message is not acknowledged, the session failed. The client should delete the data file it created and tidy up.

In the case that all is well, the server will have acknowledged the OpenSession message and will also respond by sending a Message_OLEOpenSessionAck to inform the client a session is truely open.

   Message_OLEOpenSession (&80E21)
   -------------------------------

   SWI Wimp_SendMessage (&400E7)
   On entry - R0 = User message recorded (18)
            - R1 = ^Block
                +0 = length of block
                +4 = not used on entry
                +8 = not used on entry
               +12 = your_ref (=0, this is an original message)
               +16 = message number (&80E21)
               +20 = the 16 byte unique name from the -N tag, padded with zero bytes
               +36 = window handle of display holding file
               +40 = x offset of data in window
               +44 = y offset of data in window
               +48 = format number
                format = 0 or 1 (edit file)
                 +52 = Session number (24 bit number invented by the client)
                 +56 = file type
                 +60 = full pathname of the data file, zero terminated
                format = 2 (re-edit file)
                 +52 = Session number (24 bit number invented by the client)
                format > 2 (reserved for future expansion)
            - R2 = 0 (broadcast)

   On exit  - R0 = corrupted
            Message block is updated:
              R1+4 = task handle of sender (i.e. us, the client)
              R1+8 = my_ref (unique Wimp-generated word > 0)


A format 0 message should be sent initially. If a task is running which recognises the message it will reply correctly. If the client receives the same message back (format 0) because no-one acknowledged it, it should attempt to start the server task using the value of the -R parameter specified in the OLEServer$ variable. It should then set the format to 1 and send the message to the server task using the task handle returned by Wimp_StartTask. If it receives a format 1 message back unacknowledged it knows the server has died in some way and it should remove the data file.

If a client knows it already has a link to a server, it should not attempt to send a format 0 open session message. It can send a format 2 message which will inform a server that the user has tried to perform an OLE action on the same data a second time. This gives those applications which allow documents to be closed, but not lost from memory (eg ArtWorks) a chance to reopen an edit window on the data.

If a format 2 message comes back unacknowledged, the server has presumably died in the meantime. The client should start from scratch with a format 0 message.

The server replies

   Message_OLEOpenSessionAck (&80E22)
   ----------------------------------

   The server returns the same block as OpenSession but copies my_ref (+8)
   to your_ref (+12) and puts the OLEOpenSessionAck code (&80E22) in the
   message number field (+16).

This message tells the client that a session was opened successfully and may expect Message_OLEFileChanged messages. The sending of this message by the server has several effects:

  • Because it sets the your_ref field to the my_ref field of the OLEOpenSession message, it tells the WIMP that it has acknowledged that message and the client will not get that OLEOpenSession message bounced back to it.
  • A new message (OLEOpenSessionAck) is sent to the client and can be used by the client to mark the session as open.
  • It tells the client what the task handle of the server is. Though the client might have gotten a task handle from the Wimp_StartTask call it used to start the server, in the most common cases the server will already be running, so this is the first point at which the client is informed of the task handle of the server.

The data has changed

Whenever the server saves data back to file, it sends an OLEFileChanged User message to the client (using the task handle passed in OLEOpenSession). This message format is as follows

   Message_OLEFileChanged (&80E1E)
   -------------------------------
                +0 = length of block
                +4 = task handle of sender
                +8 = my ref
               +12 = 0
               +16 = message number (&80E1E)
               +20 = format number
                 format = 0 (saved to a different file) then
                  +24 = Session number
                  +28 = full pathname of data, zero terminated
                 format = 1 (saved to the same file) then
                  +24 = Session number
                        (format used by OLESupport)
                 format > 1 then
                  +24... reserved for future extensions

Note that the server should not feel it owns the file and thus should not attempt to delete the file during emergencies. Also, if the server corrupts the file, the client should be capable of working out that the file format has been compromised when it receives an OLEFileChanged and reads back the file.

The server will send a format 1 message when it saved the data to the same file. If the data was saved to a different file, it will send a format 0 message, providing the new pathname at +28.

The client can now read the changed file from disk, though it is not obliged to do so. It can also remember the data for this session has changed and only read it back when the session is closed.

Closing the session

Whenever the server throws data away through user action (in particular when the editing window is closed), it sends a User message back to the client informing it that the session has been terminated.

   Message_OLECloseSession (&80E23)
   --------------------------------
                +0 = length of block
                +4 = task handle of sender
                +8 = my ref
               +12 = 0
               +16 = message number (&80E23)
               +20 = format number
                 format = 0 then
                   +24 = Session number (-1 means all sessions are closing)
                 format > 0 reserved for future extensions

This message tells the client that the session has ended and the file was not modified any further. It should remove the file and drop this session from its list.

Note that the client can send this message to a server or broadcast it to all servers when sessions are being closed from the client's end. (i.e. the user is closing the application down or removing one of its documents).

When a document is removed from the client (e.g. a Draw picture is deleted from a DTP application document) and there was an OLE session for that document, the client should send this message to the server with the appropriate Session number filled in. The server can then abandon the edit of this document.

When a client is closing down, it should broadcast this message with the Session number set to -1. The servers that are handling its OLE editing sessions then know that these sessions can be abandoned.

Similarly, when a server closes down, it will also send a broadcast of this message with the Session number set to -1. Clients who have sessions open with this server (recognised by the server task handle) should drop those sessions.

Session numbers & task handles

To provide context for OLE sessions a session number and task handle should be kept by the client and server for each session opened. Session numbers must be allocated by the client task in a way which makes them unique for the run time of the program. The client should also keep a copy of the server's task handle which it will receive via Message_OLEOpenSessionAck. This way it can inform the server whenever it closes down.


Messages to be handled by the client

OLECloseSession

Message_OLECloseSession (&80E23)
--------------------------------
     +0 = length of block
     +4 = task handle of sender (a server or client)
     +8 = my ref
    +12 = 0
    +16 = message number (&80E23)
    +20 = format number
      format = 0 then
        +24 = Session number (-1 means all sessions are closing)
      format > 0 reserved for future extensions

This message is sent by a server when it wants to close a session (probably because the user has finished editing the object) or when it is shutting down, in which case all its sessions should be closed (Session number = -1).

The client must check if it knows the task handle of the sender as a server it has open sessions associated with. If not, it should ignore the message.

For the given session number the client should remove the file on disk (if it still exists), and remove the session from its list of active sessions. If the session number was -1, it should do so for all open sessions which were handled by the server identified by the given task handle.

OLEFileChanged

Message_OLEFileChanged (&80E1E)
-------------------------------
     +0 = length of block
     +4 = task handle of sender (the server)
     +8 = my ref
    +12 = 0
    +16 = message number (&80E1E)
    +20 = format number
      format = 0 (saved to a different file) then
       +24 = Session number
       +28 = full pathname of data, zero terminated
      format = 1 (saved to the same file) then
       +24 = Session number
             (format used by OLESupport)
      format > 1 then
       +24... reserved for future extensions

This is what OLE is all about. The client is informed that the file has been changed by the server.

The client must check if it knows the task handle of the server as given in the message, and has a session with the given Session number open with it. If not, it should ignore the message.

If there is a session, it can read the modified file (from the original path for format 1, the given path for format 0). The client presumably may want to display the modified file in its own window.

On the other hand, a client may choose to delay the update of its data until the session is closed.

Note that this message does not imply that the session is over. The server may issue more OLEFileChanged messages for this file.

OLEOpenSessionAck

Message_OLEOpenSessionAck (&80E22)
----------------------------------
     +0 = length of block
     +4 = task handle of the sender (the server)
     +8 = my_ref
    +12 = your_ref (copy of my_ref from the OLEOpenSession sent by the client)
    +16 = message number (&80E22)
    +20 = 16 byte unique name padded with zeros
    +36 = window handle of display holding file
    +40 = x offset of data in window
    +44 = y offset of data in window
    +48 = format number
     format = 0 or 1 (edit file)
      +52 = Session number
      +56 = file type
      +60 = full pathname of data, zero terminated
    format = 2 (re-edit file)
      +52 = Session number
    format > 2 (reserved for future expansion)

This message means we are in business. The server is working on the document and the client may expect OLEFileChanged messages for it.

It is a copy of the OLEOpenSession message the client sent to the server, with the your_ref field filled with the value of the my_ref of the client's original message, and the message code replaced with the code for OLEOpenSessionAck (&80E22).

The client should check the your_ref value to see if it matches the my_ref of an OLEOpenSession message it sent, and check the Session number. If there is no match, the message should be ignored.

If the message is recognised the client should make a note of the task handle of the sender for this Session number. It will need this task handle to recognise messages coming from this server and when sending a message to the server.

OLEOpenSession

Message_OLEOpenSession (&80E21)
-------------------------------
     +0 = length of block
     +4 = task handle of the sender (a client)
     +8 = my_ref
    +12 = 0
    +16 = message number (&80E21)
    +20 = 16 byte unique name padded with zeros
    +36 = window handle of display holding file
    +40 = x offset of data in window
    +44 = y offset of data in window
    +48 = format number
     format = 0 or 1 (edit file)
      +52 = Session number
      +56 = file type
      +60 = full pathname of data, zero terminated
     format = 2 (re-edit file)
      +52 = Session number
     format > 2 (reserved for future expansion) 

The client receives one of these messages as a type 19 message (User_Message_Acknownledge) when the broadcast of the message by the client itself was not acknowledged. It should take further action to try to get the server to respond.

The client should check the task handle of the sender to see if it is its own task handle. (The client's task handle can be found in the block pointed to by R1 after it sent the OLEOpenSession message with Wimp_SendMessage).

Note that this message may also arrive due to a broadcast by another client who is looking for a server. In that case the task handle of the sender will be different from the client's own task handle, and it will be a type 17 (User_Message) or, more likely, type 18 (User_Message_Recorded) message. These should be ignored by the client.

Format 0

If a format 0 message comes back, this means the server is not running. The client should try to start the server using the value in the -R field of the environment variable. If the Wimp_StartTask of the server failed (it returned a task handle of 0) the client should consider the attempt failed and display an appropriate message to the user, and clean up (remove the saved file, remove the session from its internal list, etc).

On succes, the client should send a new OLEOpenSession User_Message_Recorded (18) message directly to the server, using the task handle returned by Wimp_StartTask, this time with format set to 1.

Format 1

If a format 1 message comes back, this means that we tried to start the server but it either died or does not acknowledge the message (i.e. it refuses to handle the file for some reason). The client should assume the session failed, inform the user with a suitable message, and clean up (remove the saved file, remove the session from its internal list, etc).

Format 2

If a format 2 message comes back, the server apparently has died since the last contact. The client should clean up the old session and start a new OLE session from scratch, i.e. read the environment variable, send an OLEOpenSession message with format 0 and continue the same way as for the original session.

Actions a client should take

Starting a session

As described above, when a client wants to start an OLE session, it should write the file to disk and check for the environment variable. It should make sure it can handle the messages as described above. It should generate a Session number and remember it belongs to this particular item in its internal data. It should then broadcast an OLEOpenSession User_Message_Recorded (type 18) message. The handler for the OLEOpenSession message will deal with any problems in case the server was not running. The other handlers will deal with the rest of the session.

Discarding a file

When the user takes an action that discards an object for which an OLE session is in progress, the client should send an OLECloseSession User message to the server. It should then clean up (remove the file, etc).

Quitting the client

If the client it closing down and it still has sessions open, it should either send each of the servers it knows about an OLECLoseSession User message with the Session number set to -1, or broadcast such a message (recommended). (Note: this implies that servers should pay attention to the task handle of the sender in OLECloseSession messages it receives, and only stop editing the documents for that particular client). Actually, the client need not check if it has sessions open, it can simply broadcast the message.

Personal tools