StrongARM

From RISC OS

(Difference between revisions)
Jump to: navigation, search
(See Also)
(RiscPC Processor Cards)
Line 9: Line 9:
*233 MHz
*233 MHz
The minimum RISC OS version for StrongARM is 3.70. There are various chip revisions, not all of them are able to run in lazy task swapping mode.
The minimum RISC OS version for StrongARM is 3.70. There are various chip revisions, not all of them are able to run in lazy task swapping mode.
 +
 +
[[File:SA110Kfront1600px.JPG|200px|thumb|left|Frontside]]
 +
[[File:SA110Kback1600px.JPG|200px|thumb|left|Backside]]
==Kinetic Processor Cards==
==Kinetic Processor Cards==

Revision as of 20:38, 20 September 2018

The StrongARM is an ARMv4 processor designed and originally manufactured by Digital Equipment Corporation, and later manufactured by Intel. It was replaced by the XScale in Intel's lineup.

The StrongARM was used in the Acorn and Castle RiscPC, the Castle Kinetic RiscPC, and the MicroDigital Omega.

Contents

RiscPC Processor Cards

Acorn sold three StrongARM processor cards, based on the Digital SA-110, for the RiscPC. The only difference between them is the speed rating of the SA-110 used, and the speed that the cards were set to run. These cards are:

  • 160 MHz (overclocked from the factory to 200 MHz)
  • 200 MHz
  • 233 MHz

The minimum RISC OS version for StrongARM is 3.70. There are various chip revisions, not all of them are able to run in lazy task swapping mode.

Frontside
Backside

Kinetic Processor Cards

Main article: Kinetic

MicroDigital Omega

Main article: MicroDigital Omega

See Also




Personal tools