| Dcraw | Version: 9.28-1 | arm |
decode raw digital camera images
This utility converts the native (RAW), format of various digital
cameras into netpbm portable pixmap (.ppm) image. Supports the
following models: Canon, Kodak, Olympus, Nikon, Fuji, Minolta and
Sigma (see http://www.cybercom.net/~dcoffin/dcraw/ for full list)
Note: This utility does not read directly from the cameras, only
the files after they have been downloaded, use gphoto2 for that.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| DCRaw | Version: 9.28-1 | vfp |
decode raw digital camera images
This utility converts the native (RAW), format of various digital
cameras into netpbm portable pixmap (.ppm) image. Supports the
following models: Canon, Kodak, Olympus, Nikon, Fuji, Minolta and
Sigma (see http://www.cybercom.net/~dcoffin/dcraw/ for full list)
Note: This utility does not read directly from the cameras, only
the files after they have been downloaded, use gphoto2 for that.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| Decor | Version: 1.40-2 |
Ultimate RISC OS Backdrop Changer
Decor takes directories of JPEGs and Sprites and
displays them in configured manner on the backdrop.
It can even be used as a slideshow with a temporary folder.
| Required | Nothing |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
| Gerb2tiff | Version: 1.2-3 | arm |
gerb2tiff is a command line driven program that will read an
input file of Gerber RS273X format and generates a raster graphics
bitmap. Output file is uncompressed monochrome TIFF image.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| Ghostscript | Version: 8.71-2 |
interpreter for the PostScript language and for PDF
GPL Ghostscript is used for PostScript/PDF preview and printing.
Usually as a back-end to a program such as ghostview, it can display
PostScript and PDF documents in an X11 environment.
Furthermore, it can render PostScript and PDF files as graphics to be
printed on non-PostScript printers. Supported printers include common
dot-matrix, inkjet and laser models.
| Required | SharedUnixLibrary (>= 1.11) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
| GhostScript9 | Version: 9.27-1 | vfp |
interpreter for the PostScript language and for PDF
GPL Ghostscript is used for PostScript/PDF preview and printing.
Usually as a back-end to a program such as ghostview, it can display
PostScript and PDF documents in an X11 environment.
Furthermore, it can render PostScript and PDF files as graphics to be
printed on non-PostScript printers. Supported printers include common
dot-matrix, inkjet and laser models.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| Gnuplot | Version: 3.7.3-2 | arm |
`gnuplot` is a command-driven interactive function and data plotting program.
It is case sensitive (commands and function names written in lowercase are
not the same as those written in CAPS). All command names may be abbreviated
as long as the abbreviation is not ambiguous. Any number of commands may
appear on a line (with the exception that `load` or `call` must be the final
command), separated by semicolons (;). Strings are indicated with quotes.
They may be either single or double quotation marks, e.g.,
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| ImageMagick | Version: 6.9.12-0-1 | arm |
image manipulation programs -- binaries
ImageMagick is a software suite to create, edit, and compose bitmap images.
It can read, convert and write images in a variety of formats (over 100)
including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
shear and transform images, adjust image colors, apply various special
effects, or draw text, lines, polygons, ellipses and Bezier curves.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| ImageMagick | Version: 6.9.12-84-1 | vfp |
image manipulation programs -- binaries
ImageMagick is a software suite to create, edit, and compose bitmap images.
It can read, convert and write images in a variety of formats (over 100)
including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
shear and transform images, adjust image colors, apply various special
effects, or draw text, lines, polygons, ellipses and Bezier curves.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| ImageMagick7 | Version: 7.1.1-17-1 | vfp |
image manipulation program -- binary
ImageMagick is a software suite to create, edit, and compose bitmap images.
It can read, convert and write images in a variety of formats (over 100)
including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
SVG, TIFF and RISC OS Sprite. Use ImageMagick to translate, flip, mirror,
rotate, scale, shear and transform images, adjust image colors, apply
various special effects, or draw text, lines, polygons, ellipses and
Bezier curves.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| ImageView | Version: 0.06alpha-1 | vfp |
ImageView - work in progress simple image viewer and exporter/converter.
Uses the ImageMagick7 libraries.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| LibJpeg-Progs | Version: 8d1-5 | arm |
Independent JPEG Group's JPEG runtime library
The Independent JPEG Group's JPEG jpeg programs.
| Required | SharedUnixLibrary (>= 1.11) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| PNGQuant | Version: 2.13.1-1 | vfp |
PNG (Portable Network Graphics) image optimising utility
pngquant is a command-line conversion utility to quantize and dither truecolor
PNG images, especially those with a full alpha channel, down to 8-bit (or
smaller) RGBA-palette PNGs. Such images are usually two to four times smaller
than the full 32-bit versions, and partial transparency is preserved quite
nicely. This makes pngquant especially useful both for Web sites and for
PlayStation 2 development, where one of the texture formats is
RGBA-palette-based (though not PNG-compressed).
This is the same technique used for many of the images on the Miscellaneous
Transparent PNGs page (http://www.libpng.org/pub/png/pngs-img.html), and
the results are often indistinguishable from the original, truecolor PNG
images.
Optimizers (like pngcrush and optipng) optimize the compression, usually
losslessly, while pngquant quantizes colors down to 256 (or fewer) distinct
RGBA combinations, which is lossy.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| Povray | Version: 3.6.1-3 | arm |
Persistence of vision raytracer (3D renderer)
POV-Ray is a full-featured ray tracer. Ray tracers simulate objects
and light sources of the real world to calculate photorealistic, computer
generated images. Because of the nature of ray tracing, this process is
quite CPU-intensive, at the benefit of more realistic images compared to
real time rendering techniques. For example, in POV-Ray, you can model a
glass prism, and you will see a spectrum in the resulting image.
POV-Ray by itself is a command-line utility that will take scene
descriptions, written in a special easy-to-understand language, to
produce ray-traced images (or even a sequence of images, for animations).
You can either write those scene-descriptions by hand, or use external
tools to generate (parts of) the scene.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| Povray | Version: 3.6.1-3 | vfp |
Persistence of vision raytracer (3D renderer)
POV-Ray is a full-featured ray tracer. Ray tracers simulate objects
and light sources of the real world to calculate photorealistic, computer
generated images. Because of the nature of ray tracing, this process is
quite CPU-intensive, at the benefit of more realistic images compared to
real time rendering techniques. For example, in POV-Ray, you can model a
glass prism, and you will see a spectrum in the resulting image.
POV-Ray by itself is a command-line utility that will take scene
descriptions, written in a special easy-to-understand language, to
produce ray-traced images (or even a sequence of images, for animations).
You can either write those scene-descriptions by hand, or use external
tools to generate (parts of) the scene.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| RSVG-Convert | Version: 2.40.16-1 | vfp |
rsvg-convert command-line utility
The rsvg library is an efficient renderer for Scalable Vector Graphics
(SVG) pictures.
This package includes a command-line utility to convert the SVG files
to the PNG format.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| Vips | Version: 8.12.0-1 | vfp |
image processing system good for very large ones (tools)
VIPS is an image processing system designed with efficiency in mind.
It is good with large images (ones that larger than the amount of RAM in
your machine), and for working with colour. It can perform many
image manipulation tasks much faster than other packages such as
ImageMagick and the GIMP and includes some special features such as
creating single "mosaic" images from multiple parts.
VIPS consists of two main components: an image processing library
with some command-line tools and a spreadsheet-like graphical user
interface. The graphical interface is available in the nip2 package.
This package includes several command-line utilities that make it
possible to use some vips functionality from shell scripts or the
command line.
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment
| Xflame | Version: 1.0-3 | arm |
Draws animated flames
Opens a window on the desktop and draws animated flames
| Required | SharedUnixLibrary (>= 1.16) |
| Recommended | Nothing |
| Suggested | Nothing |
| Conflicts with | Nothing |
This package is designed to work on a system with the following environment