Hardware for RISC OS ports

From RISC OS

(Difference between revisions)
Jump to: navigation, search
(added OpenRD-client)
(eInfochips OpenRD-client: Volari z11 supported by xf86-driver-xgi, iirc... added cpu concerns)
Line 69: Line 69:
===Pros===
===Pros===
*A9home-like, compact machine
*A9home-like, compact machine
-
*fastest ARM currently available
 
*ARMv5 compatible, so existing IYONIX-compatible software runs unchanged
*ARMv5 compatible, so existing IYONIX-compatible software runs unchanged
*built-in video, audio, networking, storage, USB
*built-in video, audio, networking, storage, USB
===Cons===
===Cons===
-
*used graphics chip (Volari Z11) neither "open" nor powerful
+
*Graphics chip (XGI Volari Z11) not very powerful
 +
*No floating point unit
 +
*Higher power consumption than Cortex-A8 solutions of the same performance or better
*Would require a new port
*Would require a new port
===More info===
===More info===

Revision as of 19:34, 7 October 2009

This page lists hardware that may be suitable for porting RISC OS to.

Do not list hardware that already has a port under way.

When listing hardware, please list the following:

  • What the device is
  • Basic specifications (what CPU and/or SoC it uses, memory, storage, display and/or display connections, networking, any other connections, and a price in both the country of origin and UK pounds)
  • Pros - what this hardware would bring to RISC OS, relative to other hardware
  • Cons - downsides to this particular hardware
  • Link(s) for further info

Think about what the hardware really will bring to the platform, or whether it's suitable for the applications that RISC OS is used in. If it's not really suitable, please don't include it. Also, please check the talk page - hardware that has been deemed unsuitable may be moved there.

Contents

OpenPandora

Handheld gaming console/netbook-like device

Specifications

  • Texas Instruments OMAP3530 @ 600+ MHz
  • 256 MiB DDR333 SDRAM
  • 512 MiB NAND Flash
  • 800x480 4.3" resistive touchscreen, composite and S-Video display outputs
  • 802.11b/g Wifi, Bluetooth 2.0
  • USB 2.0 OTG and host, dual SDHC, stereo audio in/out
  • US$330, approximately UK£207.16 exc. VAT

Pros

  • Would provide mobile platform for RISC OS
  • Can use existing work from BeagleBoard port
  • Has built-in networking hardware

Cons

  • May be too small form factor
  • Storage could be an issue

More info

Genesi Efika MX Open Client

Freescale i.MX515-based nettop

Specifications

  • Freescale i.MX515 @ 800 MHz
  • 512 MiB RAM
  • 4 GiB internal SSD
  • HDMI and VGA display outputs
  • 802.11b/g/n Wifi, Bluetooth
  • 2x USB 2.0 host, SDHC, audio jacks
  • US$249, approximately UK£156.31 exc. VAT

Pros

  • Desktop machine, fastest Cortex-A8 available
  • More on-board storage than other current solutions
  • Has VGA port for driving older monitors
  • Has built-in networking hardware

Cons

  • Would require a new port, to the i.MX515

More info

eInfochips OpenRD-client

Small desktop machine called OpenRD-client

Specifications

  • Marvell Kirkwood 88F6281 @ 1.2 GHz
  • 512 MiB RAM DDR2-400
  • 512 MiB Flash
  • VGA display output upto 1280x1024@60 Hz
  • 2x Gigabit Ethernet
  • 7x USB 2.0 host
  • SDHC, audio jacks, serial port
  • eSATA and internal SATA
  • 2x USB 2.0 host, SDHC
  • US$249, approximately UK£156.31 or 173.76 € exc. VAT

Pros

  • A9home-like, compact machine
  • ARMv5 compatible, so existing IYONIX-compatible software runs unchanged
  • built-in video, audio, networking, storage, USB

Cons

  • Graphics chip (XGI Volari Z11) not very powerful
  • No floating point unit
  • Higher power consumption than Cortex-A8 solutions of the same performance or better
  • Would require a new port

More info




Personal tools