(Difference between revisions)
Jump to: navigation, search
(Keyboard shortcuts)
Line 139: Line 139:
== Keyboard shortcuts ==
== Keyboard shortcuts ==
'''Hotkeys in the project windows'''
Ctrl+F1        'Select' mode
Ctrl+F2        'Move segment' mode
Ctrl+F3        'Move all' mode
Ctrl+F4        'Adjust cue' mode
Ctrl+F5        'Envelope' mode
F3            Save EDL
Shift+F3      Save samples
Shift+F7      Zoom in
Shift+F8      Zoom out
F8            Undo
F9            Redo
Ctrl+A        Select all
Ctrl+C        Copy selection
Ctrl+D        Silence selection
Ctrl+L        Toggle loop on/off
Ctrl+M        Set marker
Ctrl+P        Start playback from cursor/stop and set cursor
Ctrl+Q        Drop project
Ctrl+V        Paste
Ctrl+X        Delete
Ctrl+Z        Clear selection
Space          Play selection/stop
Escape        Stop playback
Enter          Whilst playing: set marker at cursor
'''Mouse operations in the project windows'''
Ctrl+double-click on segment opens segment control window.
In select mode:
Ctrl+drag              Set selection in various ways
In select mode, clicking on a segment:
Double-click          Open segment viewer
Shift+double-click    Set selection to cover segment

Revision as of 17:28, 30 September 2016



StudioSound is a 32 track audio sequencing studio, allowing several hours of audio to be sequenced amd mixed, using an intuitive visual cutting desk.

That's how the original manual described StudioSound when it was released by Oregan back in 1996-1997. StudioSound was developed by Henrik Bjerregaard Pedersen.

StudioSound is now available as a PackMan package, and runs freakishly fast on a Raspberry Pi 2.


StudioSound allows you to:

  • Position sample files on 32 editing tracks and then move them about
  • Change the volume of each track or sample file
  • Apply realtime, non-destructive DSP effects
  • Cut out parts of each file
  • Much more


Anything slower than a StrongARM is too slow.

A fast harddisc / flash drive is important.

Make sure you get the latest version!

Getting started

Install the StudioSound package and the StudioLib package.

Make sure the audio output / HDMI cable is connected to something which can playback sound.

Start StudioSound, then click on the icon on the iconbar, and create an 8 track project.

Double-click on the !StudioLib icon. This will only a window with a bunch of sample files. Drag one of the sample files to the StudioSound window; it should appear as a small coloured rectangle. Do the same with a few more files, then press Play in the StudioSound window.


Click Adjust on the iconbar icon to open the Library. This holds the sample files that can be used in the projects. Any file you drag to the project window will also be added to the Library.

You may save the content of the Library, so that it is available every time you start StudioSound. Click Menu in the Library and select "Save as default".

Click Menu over an item in the Library and select Copy to make a copy of the item. This doesn't use any extra disc space. The copy simply contains information about which part of the original file to use.

If you double click on an item in the Library, the item will be displayed in a View window, where you can play it. If the item is a copy then you may change which part is used, by dragging a selection with the mouse. You may also open a view from a Project window, by Shift+double click on a segment.

The following icons ara available in the View window:

  • Play selection
  • Play around selection
  • Scrub
  • Stop
  • Zoom in
  • Zoom out
  • Save the selected part
  • Save the non-selected part; this is only available if the View was opened from a Project.


Click Select on the iconbar icon to create a new project - simply fill in the fields and click Create.

At the top of the project window are a number of project icons. Below them are the tracks, and below the tracks is the timeline. To the right of the tracks are a number of icons for each track.

Track icons

The are 5 icons for each track. From left to right:

  • Track number - click on it to change the height of the track.
  • Stereo position; click Adjust to reset.
  • Volume; click Adjust to reset.
  • DSP - this opens the DSP effects window.
  • Active - this controls if the track is active; if inactive the track will be muted and copy/cut/paste operations will ignore the track. Click Adjust to "solo" the track.

Project icons

At the far left is the StudioSound logo. At the far right are the input fields for specifying the selection.

First row, from left to right:

  • VU meter.
  • Project volume.
  • Playback direction.
  • Playback speed.
  • Play selection.
  • Play entire track.
  • Stop.
  • Pause.
  • Loop.
  • Selection mode; in all modes you can change the selection by dragging the timeline.
  • Move mode - this will move a single segment.
  • Move all mode - this will move all following segments on the active tracks.
  • Adjust segment mode.
  • Envelope mode.
  • Repeat.
  • Move selection.
  • Quantize.

Second row:

  • Select all track
  • Deselect all tracks.
  • Toggle tracks.
  • Playback speed indicator.
  • Zoom in.
  • Zoom out.
  • Snap.
  • Undo and Redo
  • Copy.
  • Cut.
  • Paste.
  • Paste insert.
  • Paste overwrite.
  • Save project - this will save the project as an EDL (Edit Decision List), which takes up very little space; use the menu to save the project as a sample file.
  • Goto previous marker.
  • Set marker - drag the icon to the timeline below the tracks to add a marker.
  • Goto next marker.


The timeline displays the time codes and the markers.

Drag the timeline to change the selection.


The DSP window allows up to 4 realtime effects to be applied to each track.

For each effect there is an on/off button, an effect select button (to scroll through the available effects), and adjust buttons for each of the parameters supported by the selected effect. Obviously the DSP effect use a fair amount of CPU, so don't expect to be able to apply effects to all tracks at the same time.

Project menu


The Choices window is accessed from the iconbar menu. At the moment some of the choices are obsolete, they will be removed at some point in the future.

Keyboard shortcuts

Hotkeys in the project windows
Ctrl+F1        'Select' mode
Ctrl+F2        'Move segment' mode
Ctrl+F3        'Move all' mode
Ctrl+F4        'Adjust cue' mode
Ctrl+F5        'Envelope' mode
F3             Save EDL
Shift+F3       Save samples
Shift+F7       Zoom in
Shift+F8       Zoom out
F8             Undo
F9             Redo
Ctrl+A         Select all
Ctrl+C         Copy selection
Ctrl+D         Silence selection
Ctrl+L         Toggle loop on/off
Ctrl+M         Set marker
Ctrl+P         Start playback from cursor/stop and set cursor
Ctrl+Q         Drop project
Ctrl+V         Paste
Ctrl+X         Delete
Ctrl+Z         Clear selection
Space          Play selection/stop
Escape         Stop playback
Enter          Whilst playing: set marker at cursor

Mouse operations in the project windows
Ctrl+double-click on segment opens segment control window.
In select mode:
Ctrl+drag              Set selection in various ways
In select mode, clicking on a segment:
Double-click           Open segment viewer
Shift+double-click     Set selection to cover segment
Personal tools