StudioSound

From RISC OS

Revision as of 20:49, 1 October 2016 by HBP (Talk | contribs)
Jump to: navigation, search

Contents

StudioSound

StudioSound is a 32 track audio sequencing studio, allowing several hours of audio to be sequenced amd mixed, using an intuitive visual cutting desk.

That's how the original manual described StudioSound when it was released by Oregan back in 1996-1997. StudioSound was developed by Henrik Bjerregaard Pedersen.

StudioSound is now available as a PackMan package, and runs freakishly fast on a Raspberry Pi 2.

Features

StudioSound allows you to:

  • Position sample files on 32 editing tracks and then move them about
  • Change the volume of each track or sample file
  • Apply realtime, non-destructive DSP effects
  • Cut out parts of each file
  • Much more

Recommendations

Anything slower than a StrongARM is too slow.

A fast harddisc / flash drive is important.

Make sure you get the latest version!

Getting started

Install the StudioSound package and the StudioLib package.

Make sure the audio output / HDMI cable is connected to something which can playback sound.

Start StudioSound, then click on the icon on the iconbar, and create an 8 track project.

Double-click on the !StudioLib icon. This will only a window with a bunch of sample files. Drag one of the sample files to the StudioSound window; it should appear as a small coloured rectangle. Do the same with a few more files, then press Play in the StudioSound window.

Library

Click Adjust on the iconbar icon to open the Library. This holds the sample files that can be used in the projects. Any file you drag to the project window will also be added to the Library, assuming the file is in a supported format.

You may save the content of the Library, so that it is available every time you start StudioSound. Click Menu in the Library and select "Save as default".

Click Menu over an item in the Library and select Copy to make a copy of the item. This doesn't use any extra disc space. The copy simply contains information about which part of the original file to use.

If you double click on an item in the Library, the item will be displayed in a View window, where you can play it. If the item is a copy then you may change which part is used, by dragging a selection with the mouse. You may also open a view from a Project window, by Shift+double click on a segment.

The following icons ara available in the View window:

  • Play selection
  • Play around selection
  • Scrub
  • Stop
  • Zoom in
  • Zoom out
  • Save the selected part
  • Save the non-selected part; this is only available if the View was opened from a Project.

Project

Click Select on the iconbar icon to create a new project - simply fill in the fields and click Create.

At the top of the project window are a number of project icons. Below them are the tracks, and below the tracks is the timeline. To the right of the tracks are a number of icons for each track.

Track icons

The are 5 icons for each track. From left to right:

  • Track number - click on it to change the height of the track.
  • Stereo position; click Adjust to reset.
  • Volume; click Adjust to reset.
  • DSP - this opens the DSP effects window.
  • Active - this controls if the track is active; if inactive the track will be muted and copy/cut/paste operations will ignore the track. Click Adjust to "solo" the track.

Project icons

At the far left is the StudioSound logo. At the far right are the input fields for specifying the selection.

First row, from left to right:

  • VU meter.
  • Project volume.
  • Playback direction.
  • Playback speed.
  • Play selection.
  • Play entire track.
  • Stop.
  • Pause.
  • Loop.
  • Selection mode; in all modes you can change the selection by dragging the timeline.
  • Move mode - this will move a single segment.
  • Move all mode - this will move all following segments on the active tracks.
  • Adjust segment mode.
  • Envelope mode.
  • Repeat.
  • Move selection.
  • Quantize.

Second row:

  • Select all track
  • Deselect all tracks.
  • Toggle tracks.
  • Playback speed indicator.
  • Zoom in.
  • Zoom out.
  • Snap.
  • Undo and Redo
  • Copy.
  • Cut.
  • Paste.
  • Paste insert.
  • Paste overwrite.
  • Save project - this will save the project as an EDL (Edit Decision List), which takes up very little space; use the menu to save the project as a sample file.
  • Goto previous flag.
  • Set flag - drag the icon to the timeline below the tracks to add a flag.
  • Goto next flag.

Timeline

The timeline displays the time codes and the flags.

Drag the timeline to change the selection.

DSP

The DSP window allows up to 4 realtime effects to be applied to each track.

For each effect there is an on/off button, an effect select button (to scroll through the available effects), and adjust buttons for each of the parameters supported by the selected effect. Obviously the DSP effect use a fair amount of CPU, so don't expect to be able to apply effects to all tracks at the same time.

Project menu

Project submenu


Track submenu


Selection submenu


Segment submenu


Utilities submenu

Loading files

Load sample files

You can load samples files by dragging them to the library, or dragging them to a Project window.

Load EDL

You can load a previously saved EDL by double-clicking on it, or by dragging it to the icon on the iconbar.

If the EDL references sample files that do not exist then a window is opened allowing you to specify replacements for the missing files. Missing files will be shown in red. Specify a replacement file by dragging to to the red file name.

Choices

The Choices window is accessed from the iconbar menu. At the moment some of the choices are obsolete, they will be removed at some point in the future.

Keyboard shortcuts

THIS SECTIONS NEEDS TiDYING ...

Hotkeys in the project windows

Ctrl+F1 'Select' mode

Ctrl+F2 'Move segment' mode

Ctrl+F3 'Move all' mode

Ctrl+F4 'Adjust cue' mode

Ctrl+F5 'Envelope' mode

F3 Save EDL

Shift+F3 Save samples

Shift+F7 Zoom in

Shift+F8 Zoom out

F8 Undo

F9 Redo

Ctrl+A Select all

Ctrl+C Copy selection

Ctrl+D Silence selection

Ctrl+L Toggle loop on/off

Ctrl+M Set marker

Ctrl+P Start playback from cursor/stop and set cursor

Ctrl+Q Drop project

Ctrl+V Paste

Ctrl+X Delete

Ctrl+Z Clear selection

Space Play selection/stop

Escape Stop playback

Enter Whilst playing: set marker at cursor


Mouse operations in the project windows

Ctrl+double-click on segment opens segment control window.

In select mode

Drag

Shift+drag

Ctrl+drag Set selection in various ways

In select mode, clicking on a segment:

Double-click Open segment viewer

Shift+double-click Set selection to cover segment

Personal tools