[Rpcemu] RPCEmu 0.8.7

Dave Symes dave at triffid.co.uk
Thu Sep 2 23:21:47 PDT 2010


In article <20100902211409.GC29899 at spod.org>,
   Peter Howkins <rpcemu.howkins at marutan.net> wrote:
> On Thu, Sep 02, 2010 at 08:36:49PM +0100, Dave Symes wrote:
> > Networking. Select RO 4.39 Have set everything up as per instructions
> > on both win side (working) and RO side. Upon reboot after RO network
> > configuration, it goes through the RO 4.02 part, get into the
> > Soft-Load OS section, and gets as far as...
> > "adfs::Hardisc4.$.!Boot.Choices.Hardware.Disabled.Boot.Predesk.SetUpNet"
> > and hangs with the hourglass running but getting nowhere.

> Ah 4.39, I've not got this one working right yet. One step towards it 
> working is to make sure the appletalk module isn't loaded. But that's 
> not the only issue, if you crack it let us know what it was that was the 
> blocker. 

> Peter

Peter, I'm going to recheck everything networking today, but don't hold
too much hope of me finding the answer as I'm mostly a computer user, and
only play a bit at fiddling with stuff behind the GUI.

Worth noting I guess.
I also upgraded a plain old 4.02 install with 0.8.7 and set up networking
and that seemed to be okay... In the sense that the RPCEmu will fully boot
okay.
Unfortunately still no network connection.

*ifconfig -a produces
1o0: flags=8008<LOOPBACK,MULTICAST> mtu 16384

Obviously no ping returns. (No route to host which is 192.168.0.1 the
router).

Bridging works okay, there was a minor problem but that's sorted.

I'm going to stick with the 4.02/0.8.7 install to see if I can get
networking then, I'll have another look at the 4.39

I've just been through the RO networking setup again, step by step as per
the RO configuration instructions.

Reboot RPCEmu.

*ifconfig -a gives the same report.

Dave

As it's quite short, I've posted the log below.

***************************************
RPCEmu 0.8.7 [INTERPRETER NO_DEBUG]
Build: 32-bit binary
Compiler: GCC version 3.4.5 (mingw-vista special r3)
Allegro version ID: Allegro 4.2.2, MinGW32
Host Colour Depth: 32
loadconfig: bridgename = "rpcemu"
loadconfig: network_type = "ethernetbridging"
loadconfig: mouse_following = "1"
loadconfig: cdrom_type = "0"
loadconfig: cdrom_enabled = "1"
loadconfig: blit_optimisation = "0"
loadconfig: refresh_rate = "65"
loadconfig: stretch_mode = "0"
loadconfig: sound_enabled = "0"
loadconfig: vram_size = "2"
loadconfig: cpu_type = "SA110"
loadconfig: mem_size = "64"
initpodulerom: Successfully loaded 'hostfs,ffa' into podulerom
initpodulerom: Successfully loaded 'hostfsfiler,ffa' into podulerom
initpodulerom: Successfully loaded 'SyncClock,ffa' into podulerom
Tap-Win32: device name: rpcemu
Tap-Win32: device path:
\\.\Global\{91CCFC29-D09E-4295-8CEB-1BEBDBD00876}.tap
Tap-Win32: File opened
Tap-Win32: version: 9.7.0
Tap-Win32: status set
Tap-Win32: tap_win32_overlapped_init done
Tap-Win32: Thread created
Networking available
HostFS: Registration request version 1 accepted
R 0=000007FE R 4=FFFFFFFF R 8=00000802 R12=02102B84
R 1=000005F8 R 5=02106208 R 9=00000602 R13=01C07FAC
R 2=00000000 R 6=FFFFFFFE R10=02224A58 R14=00000000
R 3=02224A59 R 7=FFFFFFFE R11=02281204 R15=439761B3
0 MMU enabled
00000000 00000000 00000000Tap-Win32: tap_cleanup

**************************************

-- 

Dave Triffid



More information about the Rpcemu mailing list