[Rpcemu] New 0.9.2 Mac binary release

Timothy Coltman lists at maemagel.com
Mon Apr 27 12:05:34 PDT 2020



> On 27 Apr 2020, at 19:42, Peter Moore <petemoore at gmx.net> wrote:
> 
> Hi guys!
> 
> I installed the new RPCEmu, and managed to dump an image of my RISC PC 600 hard drive using `dd` on linux.
> 
> I copied the raw hard disk image to the RPCEmuDataDir as hd4.hdf and have RISC OS 3.60 roms in place.
> 
> I followed the instructions on https://www.marutan.net/rpcemu/manual/#hdf <https://www.marutan.net/rpcemu/manual/#hdf> but when i run the first command I get the following error:
> 
> <Screenshot 2020-04-27 at 20.33.10.png>
> 
> RISC OS 24MB
> 
> Supervisor
> 
> *dir aufs::4.$
> 
> Disc drive not known (Error number &108AC)
> *
> 
> 

Strange - your boot messages don't include ADFS.  Is your CMOS corrupted? I'd try copying the one from my recent Mac release, as that's the one supplied with the source, so should contain some sensible defaults.  If that doesn't work, check to see if the module is unplugged (*RomModules).

Incidentally, which release are you using?  The "plist" file you included looks like one of Francis Devereux's from the 0.8.x versions (judging from the file name).

> 
> Does the raw device file produced by dd need to be altered in any way for it to work?

It looks like it (Sarah is the original author of RPCEmu):

https://stardot.org.uk/forums/viewtopic.php?t=18291#p254144 <https://stardot.org.uk/forums/viewtopic.php?t=18291#p254144>

There are some instructions here:

http://www.riscos.info/pipermail/rpcemu/2011-March/001261.html <http://www.riscos.info/pipermail/rpcemu/2011-March/001261.html>

Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.riscos.info/pipermail/rpcemu/attachments/20200427/55922457/attachment.html>


More information about the RPCEmu mailing list